D16 swap

joakwin · 30-12-2012, 11:41 AM

yep, i got the drive train set up off of K20/k24
i got the car back march 2009
my car started out as a 1984 mayfair, 500gbp rust bucket, but it drove, 998/auto with a slipping auto box, i didn't care, fixed her up for 6 months and got her to pass MOT, and then 2 months later the diff in the auto box went out, box still slipped changing gears, so i junked that engine, and then i got a 1275/auto from a mk1 metro with 40k miles on it, drove it alittle bit like that, and then the oil cooler line blew out from the fitting in the tranny case, as soon as that happened i turned it off, and then i said screw it because i had a water leak, ended up replacing half the panels on the car to the stop the water leak and i knew after that i would never go back to the A-lump engine again

the set up right outside his garage, getting ready to go to a new home

me and my little brother pushed the set up home thur the streets, lol
and the sweet part of it, right when i got it in my garage thats when the rain started to come down

i still had alittle more work to be done to my shell, im waiting to paint the shell because its alittle cold right now, i should be able to get some paint on it by march time frame, or im gonna have to get a few space heters and paint it that way

started working the harness

joakwin · 30-12-2012, 11:49 AM

this was my last project i built, 5.3l v8/auto, engine driven compressor, 15gals of air,
8 valves, 24x10 rims, 2 custom build 18's-5000watts
it was a daily driver toy

joakwin · 30-12-2012, 11:59 AM

the night i got her home

joakwin · 30-12-2012, 12:01 PM

the bonnet i built for it

joakwin · 30-12-2012, 12:03 PM

and then i went to town on rebuilding the suspension

joakwin · 30-12-2012, 12:05 PM

joakwin · 30-12-2012, 12:06 PM

started to de-seam it

joakwin · 30-12-2012, 12:13 PM

seats for it

mk tail lights

new rear brakes from mini sport

new seat belts from summitracing

joakwin · 30-12-2012, 12:19 PM

my kids made this there play thing, lol
6point cds cage

part of the water leak

joakwin · 30-12-2012, 12:21 PM

what i cut out

joakwin · 30-12-2012, 12:23 PM

the plates i made for the cage

joakwin · 30-12-2012, 12:27 PM

started to fit a new front clip and then ended up selling it to do a grp clubby from abs

wiring the chassis with a harness from speedwaymotors

joakwin · 30-12-2012, 12:30 PM

cf boot floor from abs

and since i did this boot floor, i had to change my rear suspension

mini tec rear suspension

with qa1's

joakwin · 30-12-2012, 12:33 PM

rear hubs
i wish they made them in black, but they are super nice tho

bed lined and ready to go

joakwin · 30-12-2012, 12:37 PM

i didn't like the blue with the hubs on, so i painted them

30-12-2012, 11:41 AM	#1
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	D16 swap yep, i got the drive train set up off of K20/k24 i got the car back march 2009 my car started out as a 1984 mayfair, 500gbp rust bucket, but it drove, 998/auto with a slipping auto box, i didn't care, fixed her up for 6 months and got her to pass MOT, and then 2 months later the diff in the auto box went out, box still slipped changing gears, so i junked that engine, and then i got a 1275/auto from a mk1 metro with 40k miles on it, drove it alittle bit like that, and then the oil cooler line blew out from the fitting in the tranny case, as soon as that happened i turned it off, and then i said screw it because i had a water leak, ended up replacing half the panels on the car to the stop the water leak and i knew after that i would never go back to the A-lump engine again the set up right outside his garage, getting ready to go to a new home me and my little brother pushed the set up home thur the streets, lol and the sweet part of it, right when i got it in my garage thats when the rain started to come down i still had alittle more work to be done to my shell, im waiting to paint the shell because its alittle cold right now, i should be able to get some paint on it by march time frame, or im gonna have to get a few space heters and paint it that way started working the harness Last edited by joakwin; 30-12-2012 at 01:26 PM.

30-12-2012, 12:33 PM	#14
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	rear hubs i wish they made them in black, but they are super nice tho bed lined and ready to go Last edited by joakwin; 30-12-2012 at 12:35 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

30-12-2012, 11:49 AM	#2
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	this was my last project i built, 5.3l v8/auto, engine driven compressor, 15gals of air, 8 valves, 24x10 rims, 2 custom build 18's-5000watts it was a daily driver toy

30-12-2012, 11:59 AM	#3
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	the night i got her home

30-12-2012, 12:01 PM	#4
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	the bonnet i built for it

30-12-2012, 12:03 PM	#5
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	and then i went to town on rebuilding the suspension

30-12-2012, 12:05 PM	#6
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock

30-12-2012, 12:06 PM	#7
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	started to de-seam it

30-12-2012, 12:13 PM	#8
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	seats for it mk tail lights new rear brakes from mini sport new seat belts from summitracing

30-12-2012, 12:19 PM	#9
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	my kids made this there play thing, lol 6point cds cage part of the water leak

30-12-2012, 12:21 PM	#10
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	what i cut out

30-12-2012, 12:23 PM	#11
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	the plates i made for the cage

30-12-2012, 12:27 PM	#12
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	started to fit a new front clip and then ended up selling it to do a grp clubby from abs wiring the chassis with a harness from speedwaymotors

30-12-2012, 12:30 PM	#13
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	cf boot floor from abs and since i did this boot floor, i had to change my rear suspension mini tec rear suspension with qa1's

30-12-2012, 12:37 PM	#15
joakwin Senior Member Join Date: Sep 2009 Location: Tucson, AZ Posts: 651 Subframe: Home Made CC: 1.6 Make: Honda ECU: Bone stock	i didn't like the blue with the hubs on, so i painted them